Products Company Order News Technical



     
PRODUCTS / OPTICAL FIBER PRODUCTS / BULK CABLE / Three-channel Hybrid Fiber
 
     
  Three-channel Hybrid Fiber  
 
FEATURES & BENEFITS
Unique Hybrid Composite Construction
Low-loss Single-mode Optical Fiber
Three Groups of Fiber and Copper Elements
Interconnects up to Three SMPTE 304M Based HD Camera Systems
Cost Effective
UL Riser Rated
   
 
         
  The HDC3R three-position hybrid fiber cable is a unique solution for the distribution of up to three SMPTE hybrid fiber camera positions in a permanent installation application. Each channel within the HDC3R features a group of elements that consist of two singlemode fibers, two auxiliary copper conductors, two signal copper conductors, and a foil shield with drain wire. The foil shields feature nonconductive backings and edges to provide electrical isolation between the three shields. The single- mode fiber elements feature a breakout-style Kevlar and PVC jacket construction for added durability and secure connector termination. The PVC jacket is orange with a yellow stripe for easy identification and has a low-friction surface for easy installation through conduit.  
         
  Mechanical Specifications
  Part # Nominal OD Master Jacket (Type, Colors) UL Type Approx.
Weight
   HDC3R .600” PVC, Orange with Yellow Stripe CMR 170 lbs/Mft
     Three-channel Hybrid Fiber Camera Cable
  Mechanical Specifications (Series)
   Component Number Type Insulation (Type, OD) Color Code
   Optical 6 (3 Groups of 2) Single-mode Fiber Optic (8.3 µm Mode  
Field, 125 µm Cladding)
PVC Fiber Coating, Kevlar Wrap, Tube  
PVC Jacket, 3mm Finished O.D.

Yellow with Alphanumeric Print

   Signal 6 (3 Groups of 2) 24 AWG (17x32) Stranded TC PVC, .040”

One Red, One Gray (Solid or
with Yellow or Orange Stripe)

   Auxiliary 6 (3 Groups of 2) 18 AWG (19x30) Stranded TC PVC, .082”

One White, One Black (Solid or
with Yellow or Orange Stripe)

   Shield 3 (1 per Group) 100% Foil with 24 AWG (7x32)
Stranded TC Drain
-----

-----

  Electrical & Optical Specifications
  Fiber
  Attenuation
Signal
Conductor
DCR
Power
Conductor
DCR
Insulation
Resistance
(Power or Signal)
Dielectric
Strength
(Power or Signal)
Operating
Temperature
  < 0.50 dB/Km @
 1310mm/1550mm
 23.8 Ω/Mft  6.0 /Mft >10M Ω/km 3000 Volts RMS
@ 20°C, 60Hz for 1 min.
-40°C to +75°C
(@ 0 to 95% humidity)

    Back


Toll Free: 800-966-0069  FAX: 847-795-8770